4 GOOD REASONS
TO MAINTAIN YOUR CHAIN
To ride safely
To increase the lifespan of your chain kit
To increase the power of your engine
For the beauty of your engine and comfort
Is your chain dirty? Have you been riding in the storm or in the rain? Is it noisy or dry? Then it’s time clean and grease it!
Here's what you need :
List of IPONE's products :
THE chain grease that holds 800km
THE degreaser that cleans and makes your chain shine like it's brand-new
The chain brush
The indispensable accessory for an optimal cleaning of the chain and sprocket
The environmental mat
To protect all floors from oil or petrol stains
A pair of one-sized mechanical gloves, 100% nylon
Other accessories needed :
Settle in a ventilated area.
Engine turned off, place your bike on the centre stand or on a paddock stand to be able to turn the rear wheel.
Put on your gloves and let's go !
Follow these steps :
First with Chain Cleaner
Spray the chain cleaner. Its powerful spray allows you to take off all the dirt. Let it work for a few minutes.
Then with the brush
Brush the chain by rotating the rear wheel always in the direction of travel to remove all impurities. Easy peasy!
Between cleaning and greasing, it's time to check the chain tension and adjust it if necessary.
It can be interesting to lube your chain after riding for a little while. The chain is hot and the grease will penetrate the links better.
With the X-Trem Chain
Rotate the rear wheel always in the direction of travel and spray the x-trem chain along the entire length of the chain, insisting on the inside.
Let the grease penetrate for about two hours so that it infiltrates everywhere before going on the road again
The essentials in video
To continue, we suggest watching our video tutorial on the same subject.
THE PRODUCTS YOU NEED